Pioneer AVIC-X910BT Installation Manual - Page 22
Installation
UPC - 000125629513
View all Pioneer AVIC-X910BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Section 04 Installation Parts supplied The navigation unit Binding screw (5 mm × 6 mm) (8 pcs.) Flush surface screw (5 mm × 6 mm) (8 pcs.) Installation using the screw holes on the side of the navigation unit % Fastening the navigation unit to the factory radio-mounting bracket. Position the navigation unit so that the brackets screw holes and its screw holes are aligned (are fitted), and tighten the screws at 3 or 4 locations on each side. Use either the binding screws (5 mm × 6 mm) or flush surface screws (5 mm × 6 mm), depending on the shape of the bracket's screw holes. If the pawl gets in the way, bend it down Factory radio mounting bracket 22 En Binding screw or flush surface screw Be sure to use the screws supplied with this navigation system. Dashboard or console