Pioneer AVIC-X940BT Installation Manual - Page 25
When installing the antenna inside the vehicle on the dashboard, or rear shelf - gps antenna
View all Pioneer AVIC-X940BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installation Section 03 English When installing the antenna inside the vehicle (on the dashboard or rear shelf) WARNING Do not install the GPS antenna over any sensors or vents on the dashboard of the vehicle, as doing so may interfere with the proper functioning of such sensors or vents and may compromise the ability of the metal sheet under the GPS antenna to properly and securely affix to the dashboard. Affix the metal sheet on the surface as level as possible where the GPS antenna faces the window. Place the GPS antenna on the metal sheet. (The GPS antenna is fastened with its magnet.) GPS antenna Metal sheet Peel off the protective sheet on the rear. Make sure the surface is free of moisture, dust, grime, oil, etc., before affixing the metal sheet. Note The metal sheet contains a strong adhesive which may leave a mark on the surface if it is removed. Notes ! When attaching the metal sheet, do not cut it into small pieces. ! Some models use window glass that does not allow signals from GPS satellites to pass through. On such models, install the GPS antenna on the outside of the vehicle. Clamps Use separately sold clamps to secure the lead where necessary inside the vehicle. En 25