Pioneer CDJ-1000 Owner's Manual - Page 7
Connections - use
View all Pioneer CDJ-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
BEFORE OPERATIONS CONNECTIONS ÷ Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. 1. Connecting to a DJ mixer (DJM-300, DJM-500, DJM-600) (sound output and control terminal connection) Use the supplied audio cables. Connect the white plug to the L (left) terminal and the red plug to the R (right) terminal. Connect the supplied control cord to enable control of the unit from the mixer to allow fader start play and back cue. Connecting DJM-600 Supplied audio cable Supplied audio cable Supplied control cord Supplied control cord CDJ-1000 CDJ-1000 ÷ CD1 and CD2 on a DJM-300 or DJM-500 mixer are connected to player A and player B respectively, in the same way as shown above. 2. Connecting control cord to allow relay play Alternate playback can be automatically performed when the control terminals of two units are connected with the supplied control cord. P.15 CDJ-1000 Supplied control cord CDJ-1000 7 En