Pioneer CDJ 1000MK3 Owner's Manual - Page 8
Connections - cdj 1000
UPC - 012562792002
View all Pioneer CDJ 1000MK3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connections Connections Always turn off power switch and disconnect power cord when making or changing connections. 1. Connection to a Pioneer DJ mixer (audio output and control connector) Using the auxiliary audio cable, connect the white plug to the L (left) jack, and the red plug to the R (right) jack. In addition, by connecting the furnished control cord, the DJ mixer can be used to control this unit for fader start play and back cue operations. Note that digital connections can be made only with mixers equipped with digital input connectors (models DJM-800, DJM-1000, etc.). Use a commercially available coaxial digital cable to connect this unit's DIGITAL OUT connector to the DJ mixer's DIGITAL IN connector. Connection example DJM-800: DJM-800 SIGNAL GND PHONO CD L LINE CD L CONTROL CONTROL R DIGITAL CD R DIGITAL CD DIGITAL IN Commercially available coaxial digital signal cable Commercially available coaxial digital signal cable Accessory audio cable CDJ-1000MK3 B Accessory audio cable Accessory control cord CDJ-1000MK3 A Accessory control cord ¶ When making connections to the DJM-1000, the furnished audio cables can be used to connect one set of the CD/LINE connectors to player A, and the other set of CD/LINE connectors to a second player B. When making digital audio connections, a commercially available coaxial digital signal cable must be used to connect the CD player's DIGITAL OUT connector to one of the DIGITAL IN connectors (4 to 6) of the DJM-1000 mixer. ¶ When connecting to the DJM-600, DJM-300, or DJM-500, use the furnished audio cables to connect the CD1 connectors to player A, and CD2 connectors to player B. ¶ When connecting to DJM-909 or DJM-707, use the furnished audio cables to connect the CH1 CD connectors to player A, and CH2 CD connectors to player B. ¶ When connecting to DJM-3000, connect player A to CH-1 LINE 1, and player B to CH-2 LINE 3. ¶ When connecting this CD player to other audio mixers, connect the player's AUDIO OUT connectors to the mixer's LINE IN or AUX IN connectors. ( DO NOT connect to the PHONO connectors, since it may result in distorted sound or improper playback.) 8