Pioneer CDJ 100S Owner's Manual - Page 6
Power Cord Connections, Control Jack Connections - dj
UPC - 012562450261
View all Pioneer CDJ 100S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
BEFORE OPERATIONS: CONNECTIONS 2. CONTROL JACK CONNECTIONS Use a commercially available mini-plug (dia. 3.5 mm; either stereo or monaural can be used) cable to connect the CONTROL jacks. By connecting the optional DJM-300 or DJM-500 DJ mixer to the CONTROL jack of this unit, the fader starting or back cuing of this unit can be controlled from the DJ mixer. A Fader starting by DJM-300 CDJ-100S When using two players in tandem, connect the CONTROL jacks of the two players. This makes it possible to achieve automatic alternate operation of the two players. For details, see p. 12. NOTE: Fader start and relay play cannot be performed simultaneously, since different control cable connections are required. Use a commercially available miniplug (dia. 3.5 mm; either stereo or monaural can be used) cable to connect the CONTROL jacks. The fader starting or back cuing of this unit can be controlled from the DJ mixer. CDJ-100S B Fader starting by DJM-500 CDJ-100S Use a commercially available miniplug (dia. 3.5 mm; either stereo or monaural can be used) cable to connect the CONTROL jacks. The fader starting or back cuing of this unit can be controlled from the DJ mixer. CDJ-100S C Relay play using two players CDJ-100S CDJ-100S This makes it possible to achieve automatic alternate operation of the two players. Use a commercially available miniplug (dia. 3.5 mm; either stereo or monaural can be used) cable to connect the CONTROL jacks.. 3. POWER CORD CONNECTIONS After all other connections are made, connect the power cord to a household wall outlet or to the auxiliary AC power takeoff on your amplifier. ÷ Make sure plugs are fully inserted into the jacks and wall outlet. NOTE: If you do the following actions when the disc is spinning in the unit, the unit may malfunction. 1) Set the power switch to off, then on. 2) Disconnect the power cord, then connect again. To correct, press the EJECT button to stop the disc. You may then resume player operation. 6 En POWER-CORD CAUTION Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement.