Pioneer DDJ-S1 Operating Instructions - Page 10

Connections and part names ! Wait until all connections between devices have been completed before connecting the AC adapter. Be sure to turn off the power and unplug the AC adapter from the power outlet before making or changing connections between devices. Refer to the operating instructions for the component to be connected. ! Only use the AC adapter included with this unit. ! Power to this unit is supplied by the AC adapter or by USB bus power. This unit can be used by connecting it to a computer using a USB cable, even without connecting the AC adapter. ! Connect this unit and the computer directly using the included USB cable. ! A USB hub cannot be used. Notes on running this unit with USB bus power ! When using this unit on USB bus power, supply power to the connected computer from the AC power supply. Do not run the computer on its battery. ! In cases like the ones below, the power may be insufficient and this unit may not operate on USB bus power. - When the computer's USB power supply capacity is insufficient. - When other USB devices are connected to the computer. If this unit does not operate on USB bus power, connect the included AC adapter. ! The following limitations apply when operating on USB bus power: - The jog dial indicator will not light. - The [MASTER OUT 1] (XLR output) channel is not output. - The [MIC1], [MIC2] and [AUX IN] terminals cannot be used. - The indicators are dimmer than when using the AC adapter. To use the unit without these limitations, connect the included AC adapter. 2 MIC/AUX THRU selector switch Set this to [ON] if you want to output the [MIC2] and [AUX] channels directly. = Outputting the microphone and AUX sound directly (p.29) 3 MIC2 terminal Connect a microphone here. = Using a microphone (p.28) Rear panel Component, amplifier, powered speaker, etc. To audio input terminals Portable audio device To audio output terminals R 1GND 2 HOT L 3 COLD RL -12 dB -6 dB 0 dB R L MASTER ATT. MASTER OUT 1 R LR L MASTER OUT 2 AUX IN MIN MAX VOL 1 2 3 45 1GND 2 HOT 3 COLD -12 dB - 6 dB 0 dB R L MASTER ATT. MASTER OUT 1 R LR L MASTER OUT 2 AUX IN MIN MAX VOL 5 V USB ON OFF DC IN To power outlet Connecting the input/output terminals *5$) Computer AC adapter (included) Front panel PHONES MIC /AUX THRU OFF ON MIC 2 )FBEQIPOFT 5P
IFBEQIPOFT )FBEQIPOFT
DPSE .JDSPQIPOF 5P
NJDSPQIPOF .JDSPQIPOF
DBCMF PHONES 1 MIC /AUX THRU OFF ON 2 MIC 2 3 1 PHONES jacks Connect headphones here. Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs (Ø 3.5 mm) can be used. For details, see Monitoring sound with headphones on page 27. ! There are two input jacks, both a stereo phones jack and a mini phones jack, but do not use both simultaneously. If both are used simultaneously, when one is disconnected and/or connected, the volume of the other may increase or decrease suddenly. 10 En 5 V USB ON OFF DC IN 6 7 89 a 1 MASTER ATT. Sets the attenuation level of the sound output from the [MASTER1] terminal. 2 MASTER OUT 1 terminals Connect powered speakers, etc., here. 3 MASTER OUT 2 terminals Connect to a power amplifier, etc. 4 AUX IN terminal Connect to the output terminal of an external device (sampler, portable audio device, etc.) 5 VOL control Adjusts the audio level input to the [AUX IN] terminals. 6 Kensington security slot 7 USB terminal Connect to a computer. ! Connect this unit and the computer directly using the included USB cable. ! A USB hub cannot be used.