Pioneer DJM 3000 Owner's Manual - Page 16

USING THE EFFECT FUNCTIONS Operating Reverb and Pitch Shifter Effector Settings Effect REVERB PITCH (Pitch Shifter) Effect Parameter 1 (TIME) Reverb time (echo time) Setting range: 1 to 100%, in 1% steps Pitch Setting range: 0 to ±100%, in 1% steps Effect Parameter 2 (LEVEL/DEPTH) Effect mix ratio (Balance between original and reverb sound levels) Effect mix ratio (Balance between original and pitch-shifted sound levels) Example: Display when music on CH-3 has been pitch-shifted 90%. BPM display Effect parameter/BPM display H.P CUE switch Effect selector switch Effect CH. SELECT switch Effect PARAMETER 1 control (TIME) Effect PARAMETER 2 control (LEVEL/DEPTH) Effect ON/OFF switch 1 Set the Effect selector switch to PITCH. 2 Set the Effect CH. SELECT switch to 3. ÷ The Effect parameter/BPM display LED "3" will light. * The entire BPM display will turn off. 3 Set the parameter value. When the H.P CUE switch (in the BEAT EFFECTS controls) is pressed, the effect can be confirmed by listening to the headphones output. Setting Pitch ÷ Pressing # on the Effect beat selector switch will increase the pitch setting +33%, +50% or +100%, while pressing @ will decrease it -33%, -50% or -100%. ÷ More precise pitch can be set with the Effect PARAMETER 1 control (TIME). Setting the Balance Between Original and PitchShifted Sound Levels ÷ The balance between original and pitch-shifted sound levels is set using the Effect PARAMETER 2 control (LEVEL/DEPTH). Turning this control to the left will decrease pitch-shifted sound and turning it to the right will increase it. 16