Pioneer DJM-900NXS2 Owner's Manual - Page 18

Types of effects Types of SOUND COLOR FX effects Effect Name Descriptions COLOR control SPACE Applies a reverberation effect to the original sound. Turn counterclockwise: Applies the reverberation effect to the mid- and low ranges. Turn clockwise: Applies the reverberation effect to the mid- and high ranges. DUB ECHO Applies an echo effect, with the sound delayed slightly after the original sound output several times and gradually attenuated. Turn counterclockwise: Applies the echo effect to the mid-range only. Turn clockwise: Applies the echo effect to the high range only. Changes the texture of the GATE/COMP overall sound. Turn counterclockwise: A gate effect makes the sound tighter, with a reduced sense of volume. Turn clockwise: A compressor effect makes the sound fatter, with an increased sense of volume. NOISE White noise generated inside this unit is mixed in to the sound of the channel via the filter and output. ! The volume can be adjusted by turning the [TRIM] controls for the respective channels. The sound quality can be adjusted by turning the [EQ/ISO (HI, MID, LOW)] controls. Turn counterclockwise: The cut-off frequency of the filter through which the white noise passes gradually decreases. Turn clockwise: The cut-off frequency of the filter through which the white noise passes gradually increases. CRUSH Changes the original sound to a crushed-like sound for output. Turn counterclockwise: Increases the sound's distortion. Turn clockwise: The sound is crushed before passing through the high pass filter. FILTER Outputs sound that has passed through a filter. Turn counterclockwise: Gradually decreases the low-pass filter's cutoff frequency. Turn clockwise: Gradually increases the highpass filter's cutoff frequency. Types of BEAT EFFECT DELAY1 A delay sound is output once according to the beat fraction set with the [BEAT c, d] buttons. When 1/2 beat delay sound is added, 4 beats become 8 beats. Original (4 beats) 1/2 delay (8 beats) BEAT c, d buttons (param- Use these to set a time delay of 1/8 - 16/1 with respect to the eter 1) time of one beat of the BPM. TIME control (parameter 2) Use this to set the delay time. 1 to 4000 (ms) LEVEL/DEPTH control (parameter 3) Use this to set the balance between the original sound and the delay sound. X-PAD (parameter 4) Use this to set the delay time. ECHO1 2 A delay sound is output several times and gradually attenuated according to the beat fraction set with the [BEAT c, d] buttons. With 1/1 beat echoes, the delay sounds are faded out according to the track's tempo even after the input sound has been cut. Input sound turned off Fade-out 1 beat Time BEAT c, d buttons (param- Use these to set a time delay of 1/8 - 16/1 with respect to the eter 1) time of one beat of the BPM. TIME control (parameter 2) Use this to set the delay time. 1 to 4000 (ms) LEVEL/DEPTH control (parameter 3) Use this to set the balance between the original sound and the echo sound. X-PAD (parameter 4) Use this to set the delay time. SPIRAL1 2 This function adds a reverberation effect to the input sound. When the delay time is changed, the pitch changes simultaneously. Input sound turned off Fade-out 1 beat Time BEAT c, d buttons (param- Use these to set a time delay of 1/8 - 16/1 with respect to the eter 1) time of one beat of the BPM. TIME control (parameter 2) Use this to set the delay time. 10 to 4000 (ms) LEVEL/DEPTH control (parameter 3) Use this to set the balance between the original sound and the effect sound and to set the quantitative parameter. X-PAD (parameter 4) Use this to set the delay time. REVERB1 2 This function adds a reverberation effect to the input sound. Direct sound Early reflected sound Level Reverberations 1% Time 100% BEAT c, d buttons (param- Use these to set the extent of the reverberation effect, from 1 - eter 1) 100 %. TIME control (parameter 2) Use this to set the degree of the reverb effect. 1 - 100 (%) LEVEL/DEPTH control (parameter 3) Sets the balance between the original sound and the effect sound. X-PAD (parameter 4) Sets the filter's cut-off frequency. TRANS1 The sound is cut according to the beat fraction set with the [BEAT c, d] buttons. Cut Cut 1/1 beat Time BEAT c, d buttons (param- Use these to set a cut time of 1/16 - 16/1 with respect to the time eter 1) of one beat of the BPM. TIME control (parameter 2) Use this to set the effect time. 10 to 16000 (ms) LEVEL/DEPTH control (parameter 3) Sets the balance between the original sound and the effect sound. X-PAD (parameter 4) This sets the cut time. 18 En