Pioneer DJM 909 Owner's Manual - Page 14

PART NAMES AND FUNCTIONS Touch Panel Display Contents BANK 1 BANK 2 EDIT 1 CH FOOT TIME 2 0 0 0 ms LOW MID HI AUTO 1 2 0BPM EDIT 2 CH PICH 0% LOW MID HI AUTO 1 2 0 BPM BANK 1 BANK 2 BANK 3 BANK 3 FX ADJ. FX ADJ. FADER CURVE FADER CURVE BANK EDIT TIME/SELECT PROFESSIONAL 2CHANNEL MIXER DJM-909 BANK EDIT TIME/SELECT MIX/DEPTH EFFECT EFFECT LOCK ON OFF ON MIX/DEPTH MIN MAX TAP TAP MIN MAX The touch panel display has four basic patterns (A-D). The screen contents shown in the accompanying illustrations depict one example of the basic patterns, while actual displays may differ, depending on the kind of settings and status involved. A. Effect type display (main page) This display appears when the power is first turned on, or when one of the BANK (1-3) buttons is pressed. The effects for each channel are displayed as buttons, with the currently selected button displayed in reverse illumination (in this manual, indicated as black characters against white background). Other displays show status of foot switch, selected effect parameters, frequency bands subject to effects, TIME display and BPM display. CH-1 side EFFECT + | = CH-2 side EFFECT When a foot switch is connected, FOOT is displayed. EDIT 1 CH FOOT TIME 2 0 0 0 ms LOW MID HI AUTO 1 2 0BPM EDIT 2 CH PICH 0% LOW MID HI AUTO 1 2 0 BPM The frequency band subjected to effects is highlighted (HI, MID, LOW). BPM count method is displayed (AUTO). Currently selected effect is highlighted (ECHO, PITCH SHIFTER). 14 B. Effect select display Hold the FADER CURVE/BANK EDIT button depressed for about one second to change the screen to the main page effect select menu (settable independently for each channel). Rotate the TIME/SELECT dial to select the effect to be allocated to each button from the list of 50 effects displayed (see page 23, "Presetting effects"). (Example): CH-1 side. Effect list (ECHO) ≠ CH 1 BANK EDIT The button being edited (here, ECHO) = appears highlighted. 1 . DELAY 2 . ECHO 3 . PAN EC 4 . P I T EC 5 . RV DLY 6 . DK EC 7 . ROL L C. Effect parameter adjust display Press the FX ADJ. button to display the effect parameter adjust menu (settable independently for each channel). From this menu, BPM AUTO can be selected. Also, effect selection (cross fader / channel fader) can be selected for fader type. Select frequency band for effect (HI, MID, = LOW). ECHO CH1 AUTO TIME FOOT 1 2 0BPM 2 0 0 0 ms Select effect = parameter (4/1). ± Select method of BPM count (BPM AUTO). D. Fader status display Press the FADER CURVE/BANK EDIT button to view the fader status in a graphic display. By rotating the front panel FADER CURVE dial, the various attenuation responses can be set in 33 steps, and each step number also displayed. The amount of cross fader lag is also given a numerical display. CH-1 fader data = NORMAL FADER CURVE CH 1 16 CH 2 16 NORMAL + CH-2 fader data CF 1 32 CF 2 32 NORMAL + Cross fader data FADER CUT LAG : 1 .0 mm ± Cross fader lag data (FADER CUT LAG)