Pioneer DMP-555 Owner's Manual - Page 16
Advanced Operations
View all Pioneer DMP-555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ADVANCED OPERATIONS ADVANCED OPERATIONS SOURCE SELECT CARD SOURCE SELECT CD CARD CONTROL LOOP START/STOP 3/ 7 LOOP IN/ REAL TIME CUE LOOP OUT/ OUT ADJ. EXIT/RELOOP SEARCH 1, ¡ PLAY/PAUSE 6 ONE TRACK LOOP SET SCRATCH Jog dial Scratch Play (*) With the SCRATCH button set to ON (SCRATCH button indicator lights), rotate the Jog dial; scratch play is performed in accordance with the direction and speed of dial rotation. 1. Press the SCRATCH button so that the SCRATCH button indicator is lighted. ÷ When the SCRATCH button is pressed the SCRATCH button indicator flashes as data is stored in memory. When data storing is completed, the flashing indicator lights steadily. If the Jog dial is moved erratically for scratch play while the indicator is flashing, sound may be distorted. 2. Rotate the Jog dial in the direction and at the speed desired. ÷ CD playback will occur in response to the direction and speed of Jog dial rotation. 3. When Jog dial rotation is stopped: ÷ CD playback returns to its original condition. 16 En Functions indicated by * cannot be used when the Digital mode switch (DIGITAL OUT) is set to ON (and the digital output terminal is used). Loop Play (*) 7 To create a loop: Independent loops can be created for CD and memory cards. 1. Press the PLAY/PAUSE (6) button to begin playback. 2. During either playback or audible pause mode, press the LOOP IN/REAL TIME CUE button at the desired loop-in point. ÷ This step is not necessary if you wish to use a pre-selected cue point as the beginning point for the loop. 3. As playback continues, press the LOOP OUT/OUT ADJ. button at the desired loop-out point. ÷ Loop play will begin between the loop-in and loop-out points. 7 To exit from a loop (cancel loop) During loop play, press the EXIT/RELOOP button. ÷ When the play reaches the end of the loop, the loop-out point will be ignored and normal playback will continue uninterrupted. 7 To change the loop-out point 1. During loop play, press the LOOP OUT/OUT ADJ. button. ÷ The display will show the out point time, the LOOP OUT/OUT ADJ. button indicator will flash rapidly, and the LOOP IN/REAL TIME CUE button indicator will go out. 2. Press the SEARCH button (1, ¡), or rotate the Jog dial. ÷ The loop-out point will move in 1-frame increments. ÷ The loop-out point cannot be moved to any position before the loop-in point. ÷ To cancel the loop-out adjust mode, either press the LOOP OUT/OUT ADJ. button, or wait thirty seconds and the function will automatically return to loop play. 7 To return to a loop (RE-LOOP) During playback, press the EXIT/RELOOP button. ÷ Playback will return to the previously set loop-in point, and loop play will recommence. 7 To play a single track as a loop (one-track loop) During playback or audible pause mode, press the ONE TRACK LOOP SET button. ÷ A loop will be automatically created using the start of the currently playing track as the loop-in point, and the track end as the loop-out point; loop play will begin automatically. ÷ Note that if the start and end of the track includes silent (non-recorded) intervals, the loop will include those silent intervals. ÷ The loop-out point can be modified by following the procedures in the section "To change the loop-out point." 7 To set a loop on the memory card during dual mode playback (For details, P. 18) Ordinarily, when memory card playback is mixed with CD playback, the memory card is set for one-track loop. It is possible, however, to set a specific loop range if desired. 1. Press the SOURCE SELECT CARD button ([CARD] button indicator lights), then play the track you wish to use for looping. 2. Set the loop-in and loop-out points. 3. Press the CUE button in the MIXOUT CARD CONTROL block. ÷ This completes setting of the loop on the memory card. ÷ To start playback of the selected loop on the memory card, press the SOURCE SELECT CD button ([CD] button indicator lights), then press the LOOP START / STOP button (3/7) in the MIXOUT CARD CONTROL block. ÷ When the playback track on the memory card is changed, the previously set loop range is canceled.