Pioneer DV-353-K Service Manual - Page 60

7.1.2 DISPLAY OF THE MECHANISM ERROR HISTORY When mechanism error (FE error) occurred, the mechanism error history of maximum past eight times is displayed by pressing the CHP/TIM key during service mode screen display. Indication displayed in the screen upper part is new error. • Indication contents 1 Error code Two characters in the front represent the Error Code and two characters in the back represent the Servo State. The detail is as follows. 3 Error contents indication Indicate the error contents which occurred with character. Examples: When Error code is 0x13 (Focus lost timeout) and error state is 0x05 (Disc judge), "Focus lost timeout in Disc judge" ∗ Movement in the error occurrence: open the tray when SERVO STATE is Disc Judg, and others stop. However, error code is exception in the device error of 0xd∗. Servo State Error Code Indication contents 2 Error occurrence time 1 2 Error indicates the time which occurred after system 3 turned on the power supply. 1 2 ∗ When time of new error is short, it becomes assumed 3 power off once. • Table of Error Code FOCUS ERROR Focus on error Focus off error Focus lost error Focus balance adjust error Focus gain adjust error Focus sweep error Focus reflection error TRACKING ERROR Tracking on error Tracking off error Tracking lost error Tracking balance adjust error Tracking gain adjust error Tracking jump error STEPPING ERROR Stepping on error Stepping off error Stepping lost error Stepping move error SPINDLE ERROR Spindle on error Spindle off error Spindle lost error Spindle CAV error Spindle CLV error ACQUISITION ERROR PLL lost error DECODER ERROR ID lost error DEVICE ERROR SRAM error 60 0x0∗ 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x2∗ 0x21 0x22 0x23 0x24 0x25 0x26 0x4∗ 0x41 0x42 0x43 0x44 0x6∗ 0x61 0x62 0x63 0x64 0x65 0x8∗ 0x83 0xa∗ 0xa3 0xd∗ 0xd1 FOCUS TIMEOUT Focus on timeout Focus off timeout Focus lost timeout Focus balance adjust timeout Focus gain adjust timeout Focus sweep timeout Focus reflection timeout TRACKING TIMEOUT Tracking on timeout Tracking off timeout Tracking lost timeout Tracking balance adjust timeout Tracking gain adjust timeout Tracking jump timeout STEPPING TIMEOUT Stepping on timeout Stepping off timeout Stepping lost timeout Stepping move timeout SPINDLE TIMEOUT Spindle on timeout Spindle off timeout Spindle lost timeout Spindle CAV timeout Spindle CLV timeout ACQUISITION TIMEOUT PLL lost timeout DECODER TIMEOUT ID lost timeout FAIL SAFE unexpected error DV-353-K 0x1∗ 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x3∗ 0x31 0x32 0x33 0x34 0x35 0x36 0x5∗ 0x51 0x52 0x53 0x54 0x7∗ 0x71 0x72 0x73 0x74 0x75 0x9∗ 0x93 0xb∗ 0xb3 0xe∗ 0xe1 • Table of Servo State 0x00 Reset 0x01 Stop (inside position) 0x02 Stop (any position) 0x03 Braking for stop 0x04 New disc 0x05 Disc judge 0x06 Reserved 1 0x07 Playing 0x08 Start up 0x09 Seeking 0x0A Pausing 0x0B Reading BCA 0x0C Reserved 2 0x0D 0x0E 0x0F