Pioneer FH-S500BT Owner s Manual - Page 49
Installing the microphone
View all Pioneer FH-S500BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
2 Tighten the screws on each side. To install on the sun visor 1 Fit the microphone lead into the groove. Microphone lead Groove English Screw Mounting bracket Dashboard or console • Use either truss (5 mm × 9 mm) or flush surface (5 mm × 9 mm) screws, depending on the bracket screw holes. Installing the microphone The microphone should be placed directly in front of the driver at a suitable distance to pick up their voice clearly. CAUTION It is extremely dangerous to allow the microphone lead to become wound around the steering column or shift lever. Be sure to install the microphone in such a way that it will not obstruct driving. It is recommended to use the clamps (sold separately) to arrange the lead. NOTE Depending on the vehicle model, the microphone cable length may be too short when you mount the microphone on the sun visor. In such cases, install the microphone on the steering column. 2 Install the microphone clip on the sun visor. Lowering the sun visor reduces the voice recognition rate. Microphone clip To install on the steering column 1 Slide the microphone base to detach it from the microphone clip. Microphone Microphone clip - 49 -