Pioneer FH-S700BS Owner s Manual - Page 52
USB device/iPhone
View all Pioneer FH-S700BS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
English FORMAT READ → Sometimes there is a delay between the start of playback and when you start to hear any sound. - Wait until the message disappears and you hear sound. NO AUDIO → The inserted disc does not contain any playable files. - Replace the disc. SKIPPED → The inserted disc contains DRM protected files. - The protected files are skipped. PROTECT → All the files on the inserted disc are embedded with DRM. - Replace the disc. USB device/iPhone FORMAT READ → Sometimes there is a delay between the start of playback and when you start to hear any sound. - Wait until the message disappears and you hear sound. NO AUDIO → There are no songs. - Transfer the audio files to the USB device and connect. → The connected USB device has security enabled. - Follow the USB device instructions to disable the security. SKIPPED → The connected USB device contains DRM protected files. - The protected files are skipped. PROTECT → All the files on the connected USB device are embedded with DRM. - Replace the USB device. N/A USB → The connected USB device is not supported by this unit. - Disconnect your device and replace it with a compatible USB device. HUB ERROR → The USB device connected via a USB hub is not supported by this unit. - Connect the USB device directly to this unit using a USB cable. CHECK USB → The USB connector or USB cable has short-circuited. - Check that the USB connector or USB cable is not caught in something or damaged. → The connected USB device consumes more than maximum allowable current. - Disconnect the USB device and do not use it. Turn the ignition switch OFF and back to ACC or ON. Connect only compliant USB devices. → The iPhone operates correctly but does not charge. - Make sure the connection cable for the iPhone has not shorted out (e.g., not caught in metal objects). After checking, turn the ignition switch OFF and back to ON, or disconnect the iPhone and reconnect. ERROR-19 → Communication failed. - Perform one of the following operations, then return to the USB source. • Turn the ignition switch OFF and back to ON. • Disconnect the USB device. • Change to a different source. → iPhone failure. - Disconnect the cable from the iPhone. Once the iPhone's main menu is - 52 -