Pioneer FH-X820BS Owner's Manual - Page 21
Installing the microphone - double din
View all Pioneer FH-X820BS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
DIN Rear-mount 1 Determine the appropriate position where the holes on the bracket and the side of the unit match. To install on the sun visor 1 Fit the microphone lead into the groove. Microphone lead Groove 2 Install the microphone on the rear side of the steering column. 2 Tighten the screws on each side. 2 Install the microphone clip on the sun visor. Lowering the sun visor reduces the voice recognition rate. Screw Mounting bracket Dashboard or console • Use either truss (5 mm × 8 mm) or flush surface (5 mm × 9 mm) screws, depending on the bracket screw holes. Installing the microphone (Only for FH-X820BS/X720BT/X721BT) The microphone should be placed directly in front of the driver at a suitable distance to pick up their voice clearly. CAUTION It is extremely dangerous to allow the microphone lead to become wound around the steering column or shift lever. Be sure to install the microphone in such a way that it will not obstruct driving. It is recommended to use the clamps (sold separately) to arrange the lead. Microphone clip To install on the steering column 1 Slide the microphone base to detach it from the microphone clip. Microphone Microphone clip Microphone base Double-sided tape En 21 English