Pioneer HTP-074 Refurbished Operating Instructions - Page 28
Changing the frequency step of AM, Radio Except for the U.S.A., Canada, Latin America models
View all Pioneer HTP-074 Refurbished manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
4 Changing the frequency step of AM Radio (Except for the U.S.A., Canada and Latin America models) If you find that you can't tune into stations successfully, the frequency step may not be suitable for your country/region. Here's how to switch the setting: 1 Switch the receiver into standby. 2 While holding down TUNE on the front panel, hold ÍSTANDBY/ON. Each press switches between 9K STEP and 10K STEP. • Default: 9K STEP Note • If the Standby Through is not set to OFF, you may not be able to set the switching of the Fixed PCM, NTSC/PAL or 9K STEP/10K STEP Listening to your system 2 4 34 28
Listening to your system
4
28
2
34
4
Changing the frequency step of AM
Radio (Except for the U.S.A., Canada
and
Latin America models)
If you find that you can’t tune into stations successfully, the
frequency step may not be suitable for your country/region.
Here’s how to switch the setting:
1
Switch the receiver into standby.
2
While holding down
TUNE
ª
on the front panel,
hold
Í
STANDBY/ON
.
Each press switches between
9K STEP
and
10K STEP
.
•
Default:
9K STEP
Note
•
If the
Standby Through
is not set to
OFF
, you may not be
able to set the switching of the
Fixed PCM
,
NTSC
/
PAL
or
9K STEP
/
10K STEP