Pioneer P5900DVD Other Manual - Page 2
Connecting the Units, ENGLISH - ipod
UPC - 012562848563
View all Pioneer P5900DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Connecting the Units Connecting the power cord IP-BUS input (Blue) IP-BUS cable 15 cm (5-7/8 in.) 14 cm (5-1/2 in.) Multi-CD player (sold separately) Antenna cable This product 15 cm (5-7/8 in.) Fuse (10 A) Yellow Connect to the constant 12 V supply terminal. Red Connect to terminal controlled by ignition switch (12 V DC). Orange/white Connect to lighting switch terminal. Fuse resistor Fuse resistor Black (chassis ground) Connect to a clean, paint-free metal location. + Front speaker ≠ Left Rear speaker or + Subwoofer (4 Ω) ≠ White Gray White/black Green Gray/black Violet Green/black Violet/black + Front speaker ≠ Right + Rear speaker or ≠ Subwoofer (4 Ω) When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not connect anything to Green and Green/black leads. Green Not used. Green/black Violet Violet/black + Subwoofer (4 Ω) × 2 ≠ Gray Interface cable (e.g., CD-I200) (sold separately) Dock connector port 2 m (6 ft.7 in.) iPod with Dock Connector Dock connector 20 cm (7-7/8 in.) Yellow/black If you use equipment with Mute function, wire this lead to the Audio Mute lead on that piece of equipment. If not, keep the Audio Mute lead free of any connections. AUX jack (3.5 ø) Use a mini plug cable to connect with auxiliary equipment. Connection method 1. Clamp the lead. 2. Clamp firmly with needle-nosed pliers. Note: • The position of the parking brake switch depends on the vehicle model. For details, consult the vehicle Owner's Manual or dealer. Light green Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch. Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). Power supply side Ground side Parking brake switch With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. When you connect the separately sold multichannel processor (e.g., DEQ-P8000) to this unit, do not connect anything to the speaker leads and system remote control (blue/white). Note: • Change the initial setting of this unit (refer to the Operation Manual). The subwoofer output of this unit is monaural. When connecting to separately sold power amp This product Subwoofer output (SUBWOOFER OUTPUT or DEQ OUTPUT) 20 cm (7-7/8 in.) Rear output (REAR OUTPUT) Front output (FRONT OUTPUT) 15 cm (5-7/8 in.) Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). When you connect the separately sold multichannel processor (e.g., DEQ-P8000) to this unit, do not connect anything to the speaker leads and system remote control (blue/white). When you connect the multi-channel processor to this unit, refer to multi-channel processor's installation manual for the connection method. ENGLISH Connect with RCA cables (sold separately) Power amp (sold separately) Power amp (sold separately) Power amp (sold separately) System remote control Left Right + + Front speaker Front speaker ≠ ≠ + Rear speaker ≠ + Rear speaker ≠ + Subwoofer ≠ + Subwoofer ≠ Perform these connections when using the optional amplifier. Note: • Change the initial setting of this unit (refer to the Operation Manual). The subwoofer output of this unit is monaural.