Pioneer P670MP Owner's Manual - Page 35
Introduction of audio, adjustments, Compensating for, equalizer curves EQ-EX, Using balance
UPC - 012562725161
View all Pioneer P670MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Audio Adjustments Section 08 English Introduction of audio adjustments Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. 1 1 Audio display Shows the audio adjustments status. % Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: Fad (balance adjustment)EQ (equalizer curve adjustment)Bass (bass and treble level adjustment)Loud (loudness) Sub-W1 (subwoofer on/off setting)/NonFad (non fading output on/off setting)Sub-W2 (subwoofer setting)/NonFad (non fading output setting)HPF (high pass filter)SLA (source level adjustment) # If EQ-EX function has been selected and only when EQ-EX is turned on and CUSTOM is selected as the equalizer curve, you can switch to Bass. # When the subwoofer controller setting is only PREOUT:FULL, you cannot switch to Sub-W1. (Refer to page 42.) # You can select the Sub-W2 only when subwoofer output is turned on in the Sub-W1. # When the subwoofer controller setting is only PREOUT:FULL, you can switch to the nonfading output on/off setting. (Refer to page 42.) # You can select the nonfading output setting only when nonfading output is turned on in the nonfading output on/off setting. # When selecting the FM tuner as the source, you cannot switch to SLA. # To return to the display of each source, press BAND. Compensating for equalizer curves (EQ-EX) The EQ-EX function smoothes the effects of each equalizer curve. Furthermore, you can adjust bass and treble for each source when CUSTOM curve is selected. % Press and hold SW to turn EQ-EX on. EQ-EX ON appears in the display. EQ-EX is now on. # To turn EQ-EX off, press and hold SW. # If you do not operate the EQ-EX within about 8 seconds, the display automatically returned to the source display. Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press AUDIO to select Fad. Press AUDIO until Fad appears in the display. # If the balance setting has been previously adjusted, Bal will be displayed. 2 Press a or b to adjust front/rear speaker balance. Each press of a or b moves the front/rear speaker balance towards the front or the rear. Fad F 15 Fad R 15 is displayed as the front/ rear speaker balance moves from front to rear. # Fad F/R 0 is the proper setting when only two speakers are used. En 35