Pioneer P7600DVD Other Manual - Page 15
DIN Front/Rear-mount, DIN Front-mount
UPC - 012562745602
View all Pioneer P7600DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
English Español DIN Front/Rear-mount This unit can be properly installed either from "Front" (conventional DIN Front-mount) or "Rear" (DIN Rearmount installation, utilizing threaded screw holes at the sides of unit chassis). For details, refer to the following illustrated installation methods. Before installing the unit • Remove the frame and the holder. (Fig. 11) Pull out to remove the frame and then loosen the screws (2 × 3 mm) to remove the holder. (When reattaching the frame, point the side with a groove downwards and attach it.) Holder Screw (2 × 3 mm) Frame Fig. 11 DIN Front-mount Installation with the rubber bush 1. Decide the position of the side brackets. (Fig. 12) When installing in a shallow space, change the position of side brackets. In this case, stick conceal tape on parts that protrude from the dashboard. Conceal tape Side bracket Flush surface screw (5 × 6 mm) Fig. 12 Deutsch Français Italiano Nederlands 14