Pioneer VSX-LX305 Elite 9.2-Channel Network AV Receiver Instruction Manual Eng - Page 103
Connecting a transmitter for playback, Connections, Setting Up, Playing Back
View all Pioneer VSX-LX305 Elite 9.2-Channel Network AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Playback Connecting a transmitter for playback When you connect wireless headphones or a wireless speaker transmitter to the ZONE B LINE OUT jacks of this unit, you can play back the same source through the wireless headphones or wireless speakers as in the main room. Connections Setting Up 1. Use an analog audio cable to connect the ZONE B LINE OUT jacks on this unit to the input jacks on the transmitter. 1. Press on the remote controller to display the Home screen, then set "System Setup" - "Speaker" - "Configuration" - "Zone 2 Preout" ( →p115) to "Zone B". Playing Back Transmitter a 1. Press the button on the remote controller and select "Audio" - "Zone B". • In the following cases, "Zone B" cannot be selected. -- When ZONE 2 is On -- When "System Setup" - "Speaker" - "Configuration" - "Zone 2 Preout" on the Home screen is set to "Zone 2" ( →p115) 2. Select an audio output destination. Off: Outputs audio only to ZONE A. "A" on the display of the main unit lights up. On (A+B): Outputs audio to both ZONE A and ZONE B. "A" and "B" on the display of the main unit light up. On (B): Outputs audio only to ZONE B. "B" on the display of the main unit lights up. a Analog audio cable 3. Start play on the AV component. 4. Adjust the volume on the transmitter, etc., in ZONE B. • When "Zone 2 Preout" is set to "Zone B" and "Audio" - "Zone B" at AV Adjust is set to "On (A+B)", the output of ZONE A is as shown below. -- The tone cannot be adjusted. -- There will be no effect for the surround back speakers from "System Setup" - "Speaker" - "Distance" ( →p117) in the Home screen. • If "On (A+B)" is selected as an audio output destination, you can select only the "Stereo" listening mode for ZONE A when using the 2.1 ch speaker layout. 103