Pioneer VSX-LX505 ELITE AV Receiver Instruction Manual English - Page 93

„„Room EQ Dirac Live (*1): You can select the equalizers measured with Dirac Live ( →p168, p172) from "Slot1" to "Slot3". When disabling the equalizer, select "Off". • The Dirac Live measurement results are saved in "Slot1" to "Slot3", but you are able to register your own original sound quality with Manual Adjust ( →p173). • This cannot be selected when measurements are made using "Full Auto MCACC". MCACC EQ (*1)(*3): Enable or disable the equalizer function that corrects for distortion caused by the acoustic environment of the room. Phase Control (*1): Correct phase disturbance in the low range to enhance the bass. This enables you to achieve powerful bass reproduction that is faithful to the original sound. Theater Filter (*2)(*3): Adjust the soundtrack that was processed to enhance its high pitch range, in order to make it suitable for home theater. Standing Wave (*1)(*3): Setting this "On" will control the effect of the standing wave generated by the sound wave reflected by wall or similar interfering with the original sound wave. (*1) It cannot be set if the listening mode is Pure Direct. (*2) It cannot be set if the listening mode is Direct or Pure Direct. (*3) This function cannot be used if Dirac Live ( →p168, p172) is being used. Furthermore, there is no effect even if it can be selected. „„Level Front: Adjust the speaker level of the front speakers while listening to the sound. Center: Adjust the speaker level of the center speaker while listening to the sound. Subwoofer: Adjust the speaker level of the subwoofer while listening to the sound. • If you set the unit to the standby mode, the adjustments you made will be restored to the previous statuses. Playback 93