Plantronics CS500 User Guide - Page 10
Check configuration and make a test call
View all Plantronics CS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Check configuration and make a test call 1 If your desk phone has a volume control, set it to mid-range. 2 Look at the bottom panel of your base and make sure the default settings are correct. Set your desk phone's volume as well. listening volume dial ( ) = 3 and speaking volume dial ( ) = 3 configuration switch = A desk phone volume = mid-range 3 Remove the handset from the desk phone cradle. 4 While wearing your headset, press the call button on the headset. 5 If you do not hear a dial tone, adjust the configuration switch (A-G) until you do. NOTE For most phones, these factory default settings will sound the best. 6 Dial a test call from the desk phone. If needed, fine-tune the volume with the headset volume controls. You can also adjust the desk phone speaking and listening volumes on the bottom of the base. ��10