Poulan 172787 User Manual - Page 7

"HARD TOP" GRASS CATCHER ASSEMBLE FRAME AND BAG • Thread upper tubular frame into hem of bag as shown. Be sure angled ends of frame point downwards. • Slip lower frame into tubular upper frame as shown. • Slip vinyl bindings over frame. • Install two (2) blunt pointed screws in front holes and tighten securely. Sharp pointed screws (Rear and side holes) Catcher top BRAPEGUMLFOLOVCREAWSTALCRAHDCEKTRO Blunt pointed screws Catcher bag and frame (Front holes) Hem Start here Upper tubular frame TO ATTACH HARD TOP CATCHER • Open the rear door on mower housing. • Place frame side hooks into slots in handle brackets. • Release rear door, allowing it to nest into top of catcher. Upper tubular frame Rear door Handle bracket slots Vinyl bindings Lower frame Grass catcher frame hook ASSEMBLE TOP TO FRAME AND BAG NOTE: For ease of assembly, place catcher top upside down on work surface. • Nest bag and frame assembly into catcher top. • Install two (2) sharp pointed screws into rear holes first and tighten securely. • Pull catcher bag forward on frame to remove slack. • Install two (2) remaining sharp pointed screws in side holes and tighten securely. • Align lower frame and catcher top front holes. CAUTION: Under normal usage, the catcher material is subject to deterioration and wear and should, therefore, be checked frequently for replacement. Any replacement catcher should be checked to ensure compliance with original manufacturer's specifications. CAUTION: Do not run lawn mower without the discharge guard (rear door), approved grass catcher, clipping deflector or mulcher plate in place. Never attempt to operate mower with the discharge guard (rear door) removed or propped open. 7