Poulan BP406 User Manual - Page 7
Warning
View all Poulan BP406 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
WARNING: Avoid touching muffler unless engine and muffler are cold. A hot muffler can cause serious burns. GENERAL RECOMMENDATIONS The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjustments will need to be made periodically to properly maintain your unit. CHECK FOR LOOSE FASTENERS AND PARTS S Spark Plug Boot S Air Filter S Housing Screws CHECK FOR DAMAGED OR WORN PARTS Contact an authorized service dealer for replacement of damaged or worn parts. S ON/STOP Switch -- Ensure ON/STOP switch functions properly by moving the switch to the STOP position. Make sure engine stops; then restart engine and continue. S Fuel Tank -- Do not use unit if fuel tank shows signs of damage or leaks. INSPECT AND CLEAN UNIT AND DECALS S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild detergent. S Wipe off unit with a clean dry cloth. CLEAN AIR FILTER Air Filter INSPECT MUFFLER AND SPARK ARRESTING SCREEN WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer. WARNING: Avoid touching muffler unless engine and muffler are cold. A hot muffler can cause serious burns. As the unit is used, carbon deposits build up on the muffler and spark arresting screen, and must be removed to avoid creating a fire hazard or affecting engine performance. Replace the spark arresting screen every 50 hours of operation or if any damage or breaks in the screen are noted. NOTE: Do not attempt to clean the spark arresting screen. 1. Loosen and remove two screws from the heat shield. Remove the heat shield. 2. Loosen and remove both muffler screws and the muffler from the unit. Screws Heat shield Muffler Screws Air Filter Cover 3. Remove the spark arresting screen. Cleaning the air filter: A dirty air filter decreases engine performance and increases fuel consumption and harmful emissions. Always clean or replace air filter after every 20 hours of operation or yearly, whichever comes first. NOTE: To avoid damage, do not wash the paper air filter with water. Do not use pressurized air to clean or dry the air filter. Always replace a damaged air filter. 1. Clean the cover and the area around it to keep debris from falling into the carburetor chamber when the cover is removed. 2. Remove parts as illustrated. 3. Clean the air filter by gently tapping to remove dust and debris. 4. Replace parts. Spark Arresting Screen Muffler with catalyst 4. Install new spark arresting screen. 5. Reinstall muffler and both muffler screws. Tighten screws securely. 6. Reinstall heat shield and two screws. Tighten screws securely. NOTE: If any part of the muffler is cracked, broken or damaged, we recommend that the muffler be replaced. -- 7 --