Home » Poulan Manuals » Lawn & Garden » Poulan ES400 » Manual Viewer

Poulan ES400 User Manual

Poulan ES400 Manual

Get Poulan ES400 PDF manuals and user guides

View all Poulan ES400 manuals

Add to My Manuals
Save this manual to your list of manuals

Poulan ES400 manual content summary:

Poulan ES400 | User Manual - Page 1
su producto en línea en: Enregistrez votre produit en ligne à l'adresse : www.poulan.com Instruction Manual Manual de Instrucciones Manuel d'Instructions ES400 ESPAÑOL WARNING: Read and follow all Safety Rules and Operating Instructions before using this product. Failure to do so can result in
Poulan ES400 | User Manual - Page 2
replace bar, chain, hand guard, or other parts immediately if they become damaged, broken, or are otherwise removed. S Inspect chain saw cords periodically and if damaged, have repaired by an authorized service dealer. MAINTAIN YOUR SAW IN GOOD WORKING ORDER S Have all chain saw service performed
Poulan ES400 | User Manual - Page 3
conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service dealer unless otherwise indicated elsewhere in the instruction manual. S When not in use, chain saws should be stored in a dry, high or locked-up place
Poulan ES400 | User Manual - Page 4
a branch, do not let the guide bar contact another branch or other objects around it. S Keep saw chain sharp and properly tensioned. A loose or dull chain can increase the chance of kickback. Follow manufacturer's chain sharpening and maintenance instructions. Check tension at regular intervals, but
Poulan ES400 | User Manual - Page 5
TO AVOID KICKBACK. Reduced--kickback guide bars and low--kickback saw chains reduce the chance and magnitude of kickback and are recommended. Your saw has a low kickback chain and bar as original equipment. Repairs on a chain brake should be made by an authorized service dealer. Take your unit to
Poulan ES400 | User Manual - Page 6
used on saws listed in this manual. Use of bar and chain combinations other than those listed is not recommended and may not meet the CKA requirements per standard. Computed kickback angle (CKA) Table MODEL ES400 BAR P/N Length 952044418 18″ CHAIN P/N 952051338 CKA without chain brake 30_
Poulan ES400 | User Manual - Page 7
. OPERATION KNOW YOUR SAW READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Bar Oil Cap Trigger Lockout
Poulan ES400 | User Manual - Page 8
of the bar. For maximum guide bar and chain life, we recommend you use Poulan chain saw bar oil. If Poulan bar oil is not available, you may use a good grade SAE 30 oil until you are able to obtain Poulan brand. Use a funnel to fill the tank. Replace oil cap securely. Check oil level after
Poulan ES400 | User Manual - Page 9
S Stop the saw if the chain strikes a foreign object. Inspect the saw and repair parts as necessary. S Keep the chain out of dirt saw down. TREE FELLING TECHNIQUES WARNING: Check for broken or dead branches which can fall while cutting causing serious injury. Do not cut near buildings or electrical
Poulan ES400 | User Manual - Page 10
saw Closing of notch NOTE: Before felling cut is complete, use wedges to open the cut when necessary to control the direction of fall. To avoid kickback and chain with partially fallen trees that may be poorly supported. When a tree doesn't fall completely, set saw aside and pull down tree with a
Poulan ES400 | User Manual - Page 11
A SUPPORT. S Always use an overcut to cut small and freely hanging limbs. Undercutting could cause limbs to fall and pinch the saw. PRUNING against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Allowing such
Poulan ES400 | User Manual - Page 12
or bystanders. CHECK FOR DAMAGED OR WORN PARTS Contact an authorized service dealer for replacement of worn or damaged parts. NOTE: It is normal for a small amount of oil to appear under the saw after motor stops. Do not confuse this with a leaking oil tank. S Trigger Switch -- Ensure the trigger
Poulan ES400 | User Manual - Page 13
rails occurs. If replacement is necessary, use only the guide bar specified for your saw in the repair parts list or on the decal located on the chain saw. LUBRICATION Bar Oil Fill Cap WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious
Poulan ES400 | User Manual - Page 14
the saw. See GUIDE BAR AND CHAIN OIL under the OPERATION section. INSPECT AND CLEAN UNIT AND LABELS S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild detergent. S Wipe off the unit and labels with a clean dry cloth. SERVICE
Poulan ES400 | User Manual - Page 15
replacement parts. The chain must comply with kickback requirements of ANSI B175.1 when tested with this saw. See your authorized service dealer to replace and sharpen individual cutters on your chain. TO REPLACE CHAIN: 1. Disconnect the chain saw from the power source. 2. Loosen and remove bar
Poulan ES400 | User Manual - Page 16
. CUSTOMER SERVICEABLE PARTS WARNING: Use of any other ac- cessory or attachment might present a risk of injury to the operator. REPLACEMENT PART PART NO. Oil Cap Chain Catcher Screw File (5/32″ dia.) Twin Pak Chain --18″ Guide Bar -- 18″ Bar & Chain Lubricant --1 qt. Bar & Chain Lubricant --1 gal
Poulan ES400 | User Manual - Page 17
burred or bent; rails uneven. 1. See "Chain Sharpening" in Service and Adjustments section. 2. Repair or replace guide bar. Oil inadequate for bar and chain lubrication. Chain cuts at an angle. 1. Oil tank empty. 2. Oil outlet clogged. 3. Guide bar oil hole blocked. 1. Cutters damaged on one side
Poulan ES400 | User Manual - Page 18
specifically recommended by Poulan for this product. This warranty does not cover parts that will wear and require replacement with reasonable use during the warranty period. This warranty does not cover pre--delivery setup or normal adjustments explained in the instruction manual. Should you have