ProForm 10.0 Tpi English Manual - Page 6
Trouble, Shooting, Storage
View all ProForm 10.0 Tpi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2. Attach the clip on the safety key to the waistband of your clothing. Insert the safety key into the console. To turn the power on, move the key to the right. The power indicator will light. IMPORTANT: Always wear the clip when operating the treadmill. If you fall while wearing the clip, the key will be pulled from the console,.instantly turning the power off. 3. Turn the speed control knob counterclockifise until it stops at the "Reset" position, and then clockwise until the walking belt begins to move. Note: The knob must first be turned to the reset position each time the power is turned on. 4. Carefully step onto the moving walking belt and begin walking. 5. Slowly turn the speed control knob until the desired speed is reached. Turning the knob clockwise increases the speed. Turning the knob counterclockwise decreases the speed. 6. To turn the treadmill off, move the safety key to the left, and remove the key from the console. MANUAL INCLINE ADJUSTMENT To vary the intensity of your exercise, the incline of the treadmill can be changed. The incline control is located on the right side of the console. To increase the incline of the treadmill, press the end of the control furthest from you until the desired angle is reached. To decrease the incline of the treadmill, press the end of the control nearest you. There is an indicator located above the incline control on the console to measure the incline of the treadmill. Decrease Increase ELECTRONIC MONITOR OPERATION Refer to the Electronic Monitor Operation Guide accompanying this manual. TROUBLE-SHOOTING AND STORAGE Most treadmill problems can be solved by following the simple steps below. If further assistance is needed, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through 6 Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).