ProForm 10.0 Ze Elliptical English Manual - Page 11
Attach the Rear Upright Cover 24 to
View all ProForm 10.0 Ze Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. Untie and discard the wire tie attached to the Wire Harness (60). While a second person holds the Console (33) near the Upright (5), connect the wires on the Console to the Wire Harness (60) and to the Pulse Wires (34). Insert the excess wire into the Console (33) or the Upright (5). Tip: Avoid pinching the wires. Attach the Console (33) to the Upright (5) with four M4 x 16mm Screws (93). 10 33 Avoid pinching the wires 34 5 60 93 11. Attach the Rear Upright Cover (24) to the Upright (5) with two M4 x 16mm Screws (93) 11 and an M4 x 19mm Flat Head Screw (117). 24 117 93 5 11
11
10. Untie and discard the wire tie attached to the
Wire Harness (60).
While a second person holds the Console (33)
near the Upright (5), connect the wires on the
Console to the Wire Harness (60) and to the
Pulse Wires (34).
Insert the excess wire into the Console (33) or
the Upright (5).
Tip: Avoid pinching the wires.
Attach the
Console (33) to the Upright (5) with four M4 x
16mm Screws (93).
10
11
11. Attach the Rear Upright Cover (24) to the
Upright (5) with two M4 x 16mm Screws (93)
and an M4 x 19mm Flat Head Screw (117).
33
34
60
93
93
117
24
5
5
Avoid pinching
the wires