ProForm 225 Zlx Bike Uk Manual - Page 12

Attach the Water Bottle Holder 49 to

Page 12 highlights

13. Attach the Water Bottle Holder (49) to the Upright (3) with two M4 x 22mm Screws (54). 13 14. Identify the Right Pedal (26), which is marked with an "R." Using an adjustable wrench, firmly 14 tighten the Right Pedal clockwise into the Right Crank Arm (59). Tighten the Left Pedal (not shown) counterclockwise into the Left Crank Arm (not shown). Adjust the strap on the Right Pedal (26) to the desired position, and press the end of the strap onto the tab on the Right Pedal. Adjust the strap on the Left Pedal (not shown) in the same way. 49 3 54 Strap 26 59 Tab 15. Make sure that all parts of the exercise bike are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the exercise bike. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

12
13
3
49
26
Strap
Tab
59
54
13. Attach the Water Bottle Holder (49) to the
Upright (3) with two M4 x 22mm Screws (54).
14. Identify the Right Pedal (26), which is marked
with an “R.” Using an adjustable wrench, firmly
tighten the Right Pedal
clockwise
into the Right
Crank Arm (59).
Tighten the Left Pedal (not shown)
counter-
clockwise
into the Left Crank Arm (not shown).
Adjust the strap on the Right Pedal (26) to the
desired position, and press the end of the strap
onto the tab on the Right Pedal.
Adjust the
strap on the Left Pedal (not shown) in the
same way.
15.
Make sure that all parts of the exercise bike are properly tightened.
Note: Some hardware may be left
over after assembly is completed. To protect the floor or carpet from damage, place a mat under the exercise
bike.
14