ProForm 325 Csx Bike English Manual - Page 11
Tip: Avoid pinching the Main Wire 77.
View all ProForm 325 Csx Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. Tip: Avoid pinching the Main Wire (77). Hold the Upright (4) against the Frame (1). Attach the Upright with four M8 x 15mm Screws (24). Start all the Screws, and then tighten them. Next, orient the Accessory Tray (5) and the Console Cover (16) as shown. Tip: Avoid pinching the Main Wire (77). Slide the Accessory Tray (5) and the Console Cover (16) onto the Upright (4). Then, press the Accessory Tray onto the Left and Right Front Shields (57, 58). 10 77 16 Avoid pinching the Main Wire (77) 5 57, 58 4 24 1 11. Untie and discard the wire tie on the Main Wire (77). While a second person holds the Handlebar (14) near the Upright (4), route the Main Wire (77) through the notch in the Upright, through the groove in the Handlebar, and through the hole in the center of the Handlebar (see the inset drawing). Tip: Avoid pinching the Main Wire (77). Insert the Handlebar (14) into the Upright (4). Attach the Handlebar with two M8 x 63mm Bolts (26) and two M8 Locknuts (25). Make sure that the Locknuts are in the hexagonal holes (A). 11 14 Avoid pinching the Main Wire (77) Hole 26 4 77 25 A Groove Notch 11