ProForm 345 Treadmill Uk Manual - Page 9
Attach the Storage Latch 29 and the Latch Spacer 44
View all ProForm 345 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
8. Press the Upright Wire (42) into the slot in the underside 8 of the Console Base (47) in the indicated area. Cover the Upright Wire with the Right Grip Plate (36). Be careful not to pinch the Upright Wire. Tighten two 1/2" Screws (48) and a 3/4" Screw (2) into the Right Grip Plate and the Console Base. Attach the Left Grip Plate (32) over the ground wire and the other wires with two 1/2" Screws (48) and a 3/4" Screw (2) . Be careful not to pinch any of the Wires. 47 Slot 42 36 32 Ground Wire 48 2 2 48 9. Attach the Storage Latch (29) and the Latch Spacer (44) 9 to the left Upright (69) with two 3/4" Screws (2) as shown. Do not overtighten the Screws. 69 44 2 29 10.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 16). To protect the floor or carpet, place a mat under the treadmill. 9