ProForm 365si English Manual - Page 6
overtighten
View all ProForm 365si manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
4. Insert all excess wire through the right Handrail (51) and down into the right Upright (1). Attach the right Handrail (51) to the right Upright (1) with two Upright Screws (50) and an Upright Washer (23). Be sure to start both Screws before tightening either one, 7 and push on the heads of the Screws while tightening them. Position the Console Base (8) on the left and right Handrails (51). Attach the Console with four Console Screws (7). 8 7 /50 11 23 1- 5 5. Attach the Frame Guide (68) and the Frame Guide Spacer (93) to the Frame (66) with two Latch Screws (2). Be careful not to overtighten the Screws. 6. Remove the backing from the Adhesive Clip (16). Press the Adhesive Clip onto the Rear Roller Endcap (86) in the indicated location. Press the Allen Wrench (62) into the Adhesive Clip. Make sure that all parts are tightened before you use the treadmill. Note: To protect the floor or carpet, place a mat under the treadmill. 5 93 68 2 66 Thick End 6 86 62 O 16 6