ProForm 5.2 Uk Manual - Page 9

8. See the upper inset drawing. Orient the Right Handrail Spacer (98) with the Right Upright (78) as shown. Insert the Upright Wire (38) and wire tie through the Right Upright Spacer and press the Spacer onto the Upright. Have a second person hold the Handrail (96) near the Right Upright (78). Remove the wire tie from the Upright Wire (38). Connect the Upright Wire (38) to the Handrail Wire (52). See the lower inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. 8 52 Wire Tie Wire Tie 38 98 96 38 View A 98 78 78 View A 52 38 9. Insert the indicated connectors and tie into the 9 Right Upright (78). Next, set the Handrail Base (96) onto the Handrail Spacers (97, 98). 97 Attach the Handrail Base (96) with four 3/8" x 1/2" Bolts (7) and four 3/8" Star Washers (9); 9 start all four Bolts and then tighten them. See steps 5 and 7. Tighten the four 3/8" x 4 1/4" 7 9 Bolts (6). 96 Connectors 7 98 9 Tie 78 9