ProForm 510e Uk Manual - Page 7

4. Attach the two Wheel Brackets (38) to the Frame (1) with the two M10 x 25mm Button Head Screws (42) as shown. Attach a Wheel (61) to each Wheel Bracket (38) with an M10 x 45mm Button Head Bolt (59) and an M10 Nylon Locknut (29). 5. Attach the T-handle (10) to the Upright (3) with two M6 x 16mm Button Head Bolts (54) and two M6 Nylon Locknuts (17). 4 61 59 29 42 38 59 1 5 3 54 6. The Console (6) requires two 1,5V batteries (not included). Alkaline batteries are recommended. To install batteries, turn the console over. Remove the four M4 x 16mm Screws (34), and separate the Console from the Console Base (14). Insert two batteries into the battery clip as shown in the inset drawing. Make sure that the negative ends of the batteries (marked "-") are touching the springs in the battery clip. Attach a Plastic Tie (9) to the battery clip as shown. Attach the Console (6) to the Console Base (14) with the four M4 x 16mm Screws (34), making sure that the indicated wires are extending from the Console Base. Be careful not to pinch the wires. 6 6 14 Wires 10 17 Batteries 9 Battery Clip 34 7