ProForm 520 Trainer Treadmill English Manual - Page 9
Frame Bolt yet.
View all ProForm 520 Trainer Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5. See the left inset drawing. Identify the two 5 Frame Spacers (34). Open the included packet of grease, and apply grease to both sides of both Frame Spacers. Then, identify the outer side of each Frame Spacer. Next, hold a Frame Spacer (34) between the Right Upright (36) and the Lift Frame (59), with the outer side of the Frame Spacer facing the Right Upright. Attach the Right Upright to the Lift Frame with a Frame Bolt (32), a Frame Washer (33), and a Nut (47); do not tighten the Frame Bolt yet. Then, identify the Right Base Cover (91). Slide the Right Base Cover onto the Right Upright (36) and turn it to the position shown. Pull gently on the upper end of the Upright Wire (28) to remove any excess slack. 34 36 91 47 34 33 59 28 32 47 Outer Side Inner 34 Side 59 36 33 32 6. See the left inset drawing. Identify the outer side of the remaining Frame Spacer (34). Hold the Frame Spacer (34) between the Left Upright (31) and the Lift Frame (59), with the outer side of the Frame Spacer facing the Left Upright. Attach the Left Upright to the Lift Frame with a Frame Bolt (32), a Frame Washer (33), and a Nut (47); do not tighten the Frame Bolt yet. 6 90 31 47 34 33 Identify the Left Base Cover (90). Slide the Left Base Cover onto the Left Upright (31) and turn it 32 59 to the position shown. 34 31 47 Outer Side 33 32 Inner 34 Side 59 9