ProForm 525 Zlt Treadmill Uk Manual - Page 14
Lower the Frame 38 see HOW TO LOWER, THE TREADMILL FOR USE
View all ProForm 525 Zlt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
15. Attach the upper end of the Storage Latch (68) to the bracket on the Latch Crossbar (82) with an 15 M8 x 53mm Bolt (56) and an M8 Nut (67). Lower the Frame (38) (see HOW TO LOWER THE TREADMILL FOR USE on page 21). 38 67 82 56 68 16. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 23 and 24). Note: Extra hardware may be included. 14
14
16.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 23 and 24). Note: Extra hardware
may be included.
15. Attach the upper end of the Storage Latch (68)
to the bracket on the Latch Crossbar (82) with an
M8 x 53mm Bolt (56) and an M8 Nut (67).
Lower the Frame (38) (see HOW TO LOWER
THE TREADMILL FOR USE on page 21).
82
56
38
67
68
15