ProForm 525 User Manual - Page 5

ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the parts used in assembly. Assembly requires the included allen wrench , a Phillips screwdriver , and an adjustable spanner . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. If further assistance is needed, please call our Customer Service Department at 08457 089 009. Latch/Handrail Screw (81)-4 Handrail Bolt (88)-2 Washer (39)-2 Extension Leg Screw (53)-2 WARNING: Do not plug in the power 1 cord until the treadmill is completely assembled. 1. With the help of a second person, carefully raise the Uprights (11) until the treadmill is in the position shown. 11 2. Insert one of the Extension Legs (34) into the treadmill as shown. (Note: It may be helpful to tip the Uprights [11] in 2 the direction shown by the arrow as you insert the Extension Leg.) Make sure that the Base Pad (40) is on the indicated side of the Extension Leg. Attach the Extension Leg with an Extension Leg Screw (53). Make sure to push on the head of the Extension Leg Screw whilst tightening it. Next, attach the other Extension Leg (34) in the same way. 11 53 34 40