ProForm 525ex Treadmill Canadian English Manual - Page 5
Assembly - parts
View all ProForm 525ex Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the small parts used in assembly. Assembly requires the included allen wrench and your own phillips screw- driver , adjustable wrench , open end wrench and scissors . Handrail Washer (16)-2 Extension Leg Screw (34)-2 3/4" Screw (59)-6 Flange Nut (57)-2 Handrail Bolt (15)-2 5/16" Washer (61)-2 3 1/2" Handrail Bolt (89)-2 1. With the help of a second person, carefully lay the treadmill on its right side as shown (refer to the drawing 1 34 on page 4 to identify the right side). Insert the Extension Legs (41) into the treadmill. Make sure that the Extension Legs are turned so the Base Pads (36) are on the indicated side. Attach each Extension Leg with an Extension Leg Screw (34). With the help of a second person, carefully raise the treadmill to the upright position so the Extension Legs (41) are resting flat on the floor. 41 36 Shipping Bolt Bracket Refer to the inset drawing. Remove the nut, bolt, and shipping bracket from the left Upright (14). 41 Nut 36 34 14 2. Refer to HOW TO LOWER THE TREADMILL FOR USE on page 11. Follow the instructions in step 2 to lower the 2 treadmill. 15 16 Plastic Tie Cut the plastic ties that hold the cage nuts in each Handrail (2, 32) 2 14 Position the Left Handrail (2) on the left Upright (14). The lower end of the Left Handrail should be on the outside of the Extension Leg (41) as shown. (Note: The Right Handrail will have a "Right" sticker placed on it.) Thread a Handrail Bolt (15) with a Handrail Washer (16) into the left Upright and the Left Handrail. Do not tighten the Handrail Bolt yet. Attach the lower end of the Left Handrail (2) to the 41 57 Extension Leg (41) with a 3 1/2" Handrail Bolt (89), a 5/16" Washer (61), and a Flange Nut (57). Do not tighten 89 61 the Handrail Bolt yet. 5