ProForm 535 Uk Manual - Page 10

6 When you are finished exercising, stop the walking belt and remove the key. Step onto the foot rails, slide the speed control to the RESET position, and remove the key from the console. The displays will turn off about six minutes after the key is removed. Note: Any time that the walking belt is stopped and the ON/RESET button is not pressed for six minutes, the displays will automatically turn off in order to conserve the batteries. Locate the small switch on the back of the console. Move the switch upward or downward to select kilometres or miles. Re-attach the console to the console base. After changing the unit of measurement, remove one of the batteries from the console for about five seconds and then reinsert it. This will reset the console. Screws HOW TO SELECT KILOMETRES AND MILES The console can display distance and speed in either kilometres or miles. To change the unit of measurement, first UNPLUG THE POWER CORD. Next, remove the six screws attaching the console to the console base. Lift the console a few inches, being careful not to pull on the wires, and turn the console over. Screws Switch 10