ProForm 6.0 Ce Elliptical English Manual - Page 9
Tip: Avoid pinching the Main Wire 42.
View all ProForm 6.0 Ce Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5. Tip: Avoid pinching the Main Wire (42). Slide the Upright (2) onto the Frame (1). Have a second person hold the Shield Cover (37) out of the way. Attach the Upright (2) with five M10 x 20mm Screws (79) and five M10 Split Washers (78); start all the Screws, and then tighten them. Press the Shield Cover (37) into the Left and Right Shields (44, 45). 5 Avoid pinching the Main Wire (42) 37 44, 45 79 78 1 2 78 79 6. Orient the Handlebar (39) as shown. Have a second person hold the Handlebar near the 6 Upright (2). Locate the Sensor Wires (35) in the Handlebar (39). Insert the right Sensor Wire into the right side of the Upright, and insert the left Sensor Wire into the left side of the Upright. Pull the Sensor Wires upward out of the top of the Upright. Tip: Avoid pinching the wires. Attach the 2 Handlebar (39) to the Upright (2) with three M10 x 20mm Screws (79). 39 79 79 35 Avoid pinching the wires 9