ProForm 600 Uk Manual - Page 6
Assembly - c treadmill
View all ProForm 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. If you have additional questions, please call our our Customer Service Department at 0345-089009. 1. With the help of a second person, carefully raise the treadmill to the upright position. While a second person tips the treadmill to one side and holds it, insert one of the Extension Legs (103) into the treadmill as shown. Make sure that the Extension Leg is turned so the Base Pad (97) is on the bottom. Next, tip the treadmill to the other side and insert the other Extension Leg (not shown) in the same way. Lower the side of the treadmill so that both Extension Legs (103) are resting flat on the floor. 1 103 97 2. With the help of a second person, carefully tip the Uprights (82) down as shown. Make sure that the 2 Extension Legs (103) remain in the Uprights. Attach each Extension Leg (103) with two Screws (101) and a Base Pad (97) as shown. With the help of a second person, carefully tip the Uprights (82) back to the vertical position. Note: One replacement Thick Base Pad (97) may be included. Use the extra Pad if one becomes worn or needs to be replaced. 82 97 97 101 103 97 97 101 103 97 6