ProForm 650 Hr Elliptical Uk Manual - Page 4

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included hex keys and your own a phillips screwdriver , adjustable spanner , and rubber mallet . As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled. Frame Spacer (83)-1 M8 Nylon Locknut (46)-4 M10 Nylon Locknut (29)-6 M4 x 16mm Screw (66)-2 M10 Split Washer (70)-4 M8 x 19mm Shoulder Screw (22)-2 M10 x 27mm Screw (71)-3 M8 x 45mm Button Bolt (50)-4 M10.3 Black Washer (53)-2 M10 Washer (38)-6 Adjustment Bolt (20)-2 M10 x 78mm Button Bolt (27)-2 M10 x 88mm Button Screw (63)-1 M10 x 112mm Carriage Bolt (34)-4 4