ProForm 705 Trainer Treadmill English Manual - Page 11
Be Damaged When You Turn On
View all ProForm 705 Trainer Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. Attach the Crossbar (107) to the Handrails (82, 83) with four #10 x 3/4" Screws (2) and four #10 Star Washers (12). Do not tighten the Screws yet. Insert the Console Frame (102) into the Handrails (82, 83). Attach the Console Frame with four 1/4" x 1" Patch Bolts (9). Do not tighten the Patch Bolts yet. Be careful not to pinch the Upright Wire (87). First, firmly tighten the two indicated #10 x 3/4" Screws (2). Next, tighten the other two #10 x 3/4" Screws (2) and then tighten the four 1/4" x 1" Patch Bolts (9). 10 First 29 12 82 102 107 First 29 12 87 83 11. Firmly tighten the four 5/16" x 1" Flat Head Patch Bolts (3) and the two 5/16" x 1" Patch Bolts (4) (only one side is shown). With the help of a second person, hold the console assembly near the Right Handrail (83) and the Left Handrail (not shown). Connect the Upright Wire (87) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. Connect the Console Ground Wire (109) to the ground wire from the console assembly. 11 Console Assembly Console Wire 87 Wire Tie 4 3 Console Wire 87 Ground Wire 109 83 11