ProForm 795 Treadmill English Manual - Page 7
Assembly - power parts
View all ProForm 795 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY • To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish assembly. • After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner. • To identify small parts, see page 6. • Assembly requires the following tools: the included hex keys one adjustable wrench one Phillips screwdriver scissors needlenose pliers To avoid damaging parts, do not use power tools. 1. Make sure that the power cord is unplugged. Place a piece of cardboard below the rear of the 1 Frame (56) to protect the floor or carpet. Attach the Left Wheel Cap (96) to the Base (94) with two #8 x 3/4" Screws (2). Attach the Right Wheel Cap (not shown) to the right side of the Base (94) in the same way. 94 2 56 96 Cardboard 2. Pull the Upright Wire (81) and the Base Ground Wire (110) through the indicated hole in the Base 2 (94). Attach the Base Ground Wire (110) to the Base (94) with a #8 x 1/2" Ground Screw (10). Press the Grommet (77) into the square hole in the Base (94). Hole 77 81 110 10 94 7