ProForm 850 T Treadmill English Manual - Page 11

9. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Remove the two #8 x 3/4" Screws (1). Next, lift off the Crossbar (107). 9 Console Assembly 1 107 10. IMPORTANT: To avoid damaging the Crossbar (107), do not use power tools and do not overtighten the #10 x 3/4" Screws (2). There may be two Screws (A) in the Handrails (82, 83) in the indicated locations. If there are, remove and discard them. Orient the Crossbar (107) as shown. Attach the Crossbar to the Handrails (82, 83) with four #10 x 3/4" Screws (2) and four 1/4" Star Washers (12); do not tighten the Screws yet. Insert the Console Frame (102) into the Handrails (82, 83). Attach the Console Frame with four 1/4" x 1" Patch Bolts (9) and four 1/4" Star Washers (12); do not tighten the Patch Bolts yet. Be careful not to pinch the Upright Wire (87). Tighten one #10 x 3/4" Screw (2) in each end of the Crossbar (107); do not overtighten the Screws. Then, tighten the other #10 x 3/4" Screw (2) in each end of the Crossbar. Tighten the four 1/4" x 1" Patch Bolts (9) and the four #8 x 3/4" Screws (1). 10 First 2 9 12 102 12 A 107 First 2 12 9 12 82 87 A 1 83 1 11