ProForm 900w/3 Accessories English Manual - Page 5
Assembly
View all ProForm 900w/3 Accessories manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen wrenches, assembly requires a phillips screwdriver , an adjustable wrench , and a rubber mallet . As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled. M8 Nylon Locknut (38)-4 M10 Nylon Locknut (33)-4 M10 Split Handlebar Washer (59)-6 Washer (55)-2 M10 Washer (78)-2 M4 x 16mm Screw (52)-2 M6 x 25mm Screw (7)-1 M8 x 19mm Button M10 x 27mm Screw (56)-2 Pedal Bolt (80)-2 Spring Bracket Washer (35)-2 M8 x 45mm Button Screw (50)-4 M10 Bolt Set (74)-2 M10 x 27mm Patch Screw (40)-2 M10 x 27mm Screw (67)-6 M10 x 75mm Carriage Bolt (34)-4 1. Identify the Front Stabilizer (10), which has Wheels (22) attached to it. While another person lifts the front of the Frame (1), attach the Front Stabilizer to the Frame with two M10 x 75mm Carriage Bolts (34) and two M10 Nylon Locknuts (33). Make sure that the Front Stabilizer is turned so the Wheels are not touching the floor. 1 22 34 22 34 10 1 33 5