ProForm C 525 Treadmill English Manual - Page 9

8. Make sure that the Upright Wire (75) is posi- 8 tioned at the side of the post on the Right Upright (76) as shown. Orient the Pulse Bar (66) onto the top of the Left and Right Uprights (70, 76). Attach the Pulse Bar with four Pulse Bar Screws (64) and four Pulse Bar Star Washers (65). Firmly tighten the four Pulse Bar Screws. Firmly tighten the four 1 1/4" Bolts (63). 64 65 63 66 70 64 65 63 75 76 9. While a second person holds the console assembly near the Pulse Bar (66), attach the Ground Wire (107) on the Pulse Bar to the ground wire from the console assembly. Connect the wire from the console assembly to the Upright Wire (75). Make sure to connect the connectors properly (see the inset drawing). The connectors should slide together easily and snap into place. If the connectors do not slide together easily and snap into place, turn one connector and then try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Insert the connectors downward into the Right Upright (76). 9 Console Assembly Ground Wire 107 66 75 Wire 75 76 10.Set the console assembly on the Left Upright (70) and Right Upright (76). Be careful not to 10 pinch any wires. Attach the console assembly to the Pulse Bar (66) with six 3/4" Screws (23). Start all six 3/4" Screws, but do not tighten them yet. Console Assembly 66 23 75 76 23 23 70 9