ProForm Crosswalk 3.0 Xt Treadmill English Manual - Page 11

13. Carefully raise the Left Upright (38) and Right Upright (not shown). Attach the Latch Housing (91) to the Left Upright (38) with two 3/4" Screws (3). Make sure that the large hole in the Latch Housing is on the side shown. Do not overtighten the Screws. Remove the knob from the pin. Make sure that the collar and the spring are on the pin. Insert the pin into the Latch Housing (91), and tighten the knob back onto the pin. 13 91 Knob 3 Pin Spring Collar Large Hole 38 14. Attach the Left Upper Body Arm (42) to the left 14 Upright (38) with two 3 1/2" Bolts (33), two Flat Washers (29), and two Upright Star Washers (6) as shown. Make sure that the Left Upper Body Arm is on the indicated side of the Console Base (67). Attach the Right Upper Body Arm (not shown) to the Right Upright (not shown) in the same way. 29 33 67 42 6 38 15. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt (see page 23). To protect the floor or carpet, place a mat under the treadmill. 11