ProForm Crosswalk 395 Treadmill English Manual - Page 10

7. With the help of a second person, hold the console assembly near the Right Handrail (64). Connect the Upright Wire (63) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. Connect the Console Ground Wire (47) on the Console Crossbar (61) to the ground wire on the console. 7 Console Assembly Console Wire 63 64 Ground Wire 47 61 Console Wire Wire 63 Tie 8. Insert the wires into the Right Handrail (64) through the indicated hole as you set the con- 8 sole assembly on the Left and Right Handrails (59, 64). Make sure that no wires are pinched. Attach the console assembly with four #8 x 3/4" Screws (4). Start all four Screws, and then tighten them. Do not overtighten the Screws. 64 See assembly step 4. Firmly tighten the six 3/8" x 3 1/4" Screws (2) on the lower ends of the Left and Right Uprights (66, 76) (only one side is shown). 4 Console Assembly Wires Hole 76 Ground Wires 59 4 66 10