ProForm Equalizer 10.0si Owners Manual - Page 6
Assembly
View all ProForm Equalizer 10.0si manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
'ASSEMBLY Place all parts in a clear area on the floor and remove the packing materials. Make sure that all parts are included before disposing of the packing materials. Read through all steps before beginning assembly. 1. Place the Knob Washer (23) on the end of the Lock Knob (24). Raise the Handrail Upright (13) to the vertical 13 position and insert the Knob into the Handrail Upright. Tighten the Knob firmly. 23 24 2. Align the upper end of the Side Rail (64) with the left end of the Handrail (11). Turn the Handrail as shown to thread the Handrail into the Side Rail. (Note: If the 64 Handrail will not turn easily, loosen the Handrail Bolt [14] slightly.) Tighten the Handrail and the Handrail Bolt. 11 14 3. Align the lower end of the Side Rail (64) with the hole in the side of the treadmill Frame (55). Attach the Side Rail with a Side Rail Washer (60), Formed Washer (62) and Side Rail Bolt (63) as shown. Make sure that all parts are tightened securely before using the treadmill. 64 63 60 62 55