ProForm Fusion 6.5 Lx English Manual
ProForm Fusion 6.5 Lx Manual
 |
View all ProForm Fusion 6.5 Lx manuals
Add to My Manuals
Save this manual to your list of manuals |
ProForm Fusion 6.5 Lx manual content summary:
- ProForm Fusion 6.5 Lx | English Manual - Page 1
if a part is damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY. CALL TOLL-FREE: 1-888-533-1333 Mon.-Fri., 6 a.m.-6 p.m. MST ON THE WEB: www.proformservice.com USER'S MANUAL CAUTION Read all precautions and instructions in this manual before using this equipment. Save this - ProForm Fusion 6.5 Lx | English Manual - Page 2
a PART LIST/EXPLODED DRAWING are attached in the center of this manual. Remove the PART IDENTIFICATION CHART and PART LIST/EXPLODED DRAWING before placed on the weight system. If a decal is missing or illegible, call the toll-free telephone number on the front cover of this manual and order a free - ProForm Fusion 6.5 Lx | English Manual - Page 3
system. 1. Read all instructions in this manual and all warnings on the weight system before using the weight system. Use the weight system only as described in this manual of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for - ProForm Fusion 6.5 Lx | English Manual - Page 4
Thank you for selecting the versatile PROFORM® FUSION 6.5 LX weight system. The weight system offers a selection of weight stations weight system (see the front cover of this manual). To avoid a registration fee for any service needed under warranty, you must register the weight system at www - ProForm Fusion 6.5 Lx | English Manual - Page 5
service technician to assemble the weight system, call toll-free 1-800-445-2480. Before beginning assembly, carefully read the following information and instructions parts, use the PART IDENTIFICATION CHART in the 99 1 94 center of this manual. Attach a Wheel (32) to a Wheel Cap (31) with an M8 - ProForm Fusion 6.5 Lx | English Manual - Page 6
3. Press the 89mm Round Cap (39) into the Upright 3 (3). 39 Insert four M10 x 55mm Carriage Bolts (83) up through the Base (1). Note: Covering the bolt heads with a piece of tape may help hold 3 them in place. Attach the Upright (3) to the Base with the four Bolts and four M10 Nylon - ProForm Fusion 6.5 Lx | English Manual - Page 7
Weight Tube. Make sure that the Pin is underneath the Weight and is centered in the Weight Tube. Slide the Weight (27) onto the Weight Guides (13). 6. Note: If the Press Arm Cable (not shown) has been routed through the Top Cover (24), make sure that the Cable crosses under the - ProForm Fusion 6.5 Lx | English Manual - Page 8
7. Refer to the CABLE DIAGRAM on page 17 to 7 ensure correct cable routing during steps 7 through 14. 66 Use the wire in the Left Press Arm (7) to pull the Press Arm Cable (66) up through the Press Arm. Make sure that the Cable is routed around the pulleys above the Press Arm as shown in the - ProForm Fusion 6.5 Lx | English Manual - Page 9
11. Route the Press Arm Cable (66) over a 3 1/2" 11 Pulley (43). Attach the Pulley and a Cable Trap (47) to the Top Frame (12) with an M10 x 40mm Screw (97). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 47 43 97 66 12 12. Route the Press Arm Cable - ProForm Fusion 6.5 Lx | English Manual - Page 10
15. Attach two Storage Hooks (78) to the Left Shroud (15) with two M4 x 10mm Screws (77). Attach four Storage Hooks to the Right Shroud (14) in the same manner. Slide the Left Shroud (15) under the Top Cover (24). Attach the Top Cover and the Left Shroud to the Top Frame (12) with two M4 x 16mm Self - ProForm Fusion 6.5 Lx | English Manual - Page 11
17. Attach the Seat (19) to the Seat Frame (4) with 17 two M6 x 30mm Screws (87) and an M6 x 100mm Screw (85). 19 Set the Seat Frame (4) onto a set of posts on the Upright (3). 4 3 18. Attach the Bumper (36) to the Leg Developer (6) 18 with an M4 x 19mm Self-tapping Screw (100). Apply - ProForm Fusion 6.5 Lx | English Manual - Page 12
Curl Post (9) with 22 two M6 x 30mm Screws (87). 4 23 30 118 23. Make sure that all parts are properly tightened before using the weight system. The use of the remaining parts will be explained in the ADJUSTMENTS section, beginning on the following page. 20 9 87 12 - ProForm Fusion 6.5 Lx | English Manual - Page 13
from your exercise program. Also, refer to the accompanying exercise guide to see the correct form for each exercise. Properly tighten all parts each time the weight system is used. Replace any worn parts immediately. The weight system can be cleaned with a damp cloth and a mild, non-abrasive - ProForm Fusion 6.5 Lx | English Manual - Page 14
Upright (3). Set the Seat Frame onto a different set of posts on the Upright. For some exercises, the Seat (19) should be removed from the weight system and stored where it will not interfere with the exercise. 3 19 4 Post ATTACHING THE CURL PAD To use the Curl Pad (20), insert the Curl - ProForm Fusion 6.5 Lx | English Manual - Page 15
ATTACHING THE CURL BAR To use the Curl Bar (58), first attach the curl pad to the seat frame (see ATTACHING THE CURL PAD on page 14). Next, attach the pulley housings to the preacher curl position (see ATTACHING THE PULLEY HOUSINGS on page 14). Then, attach the Housing Cables (71) to the Leg - ProForm Fusion 6.5 Lx | English Manual - Page 16
Locking Casters (76) to unlock the wheels. Move the weight system to the new location. Relock the wheels on the Locking Casters. of resistance. ADJUSTING THE CABLE Woven cable, the type of cable used on the weight system, can stretch slightly when it is first used. If there is slack in the cable - ProForm Fusion 6.5 Lx | English Manual - Page 17
vary due to differences in individual weight plates and friction between the cables, pulleys, and weight guides. WEIGHT 1 2 3 4 5 6 7 8 9 10 11 12 Press Arm* . If the Cable has not been correctly routed, the weight system will not function properly and damage may occur. The numbers show - ProForm Fusion 6.5 Lx | English Manual - Page 18
the appropriate parts of the body. Exercising in an uncontrolled manner will leave you feeling exhausted. On the exercise guide accompanying this manual you will find photographs showing the correct form for several exercises, and a list of the muscles affected. Refer to the muscle chart on the next - ProForm Fusion 6.5 Lx | English Manual - Page 19
after each set for a weight loss workout. Plan to spend the first couple of weeks familiarizing yourself with the equipment and learning the proper form for each exercise. COOLING DOWN End each workout with 5 to 10 minutes of stretching. Include stretches for both your arms and legs. Move slowly - ProForm Fusion 6.5 Lx | English Manual - Page 20
Right Press Arm Curl Post Dip Handle 16mm x 6mm Spacer Top Frame Weight Guide Right Shroud Left Shroud Weight Tube Pad Tube Backrest Seat Curl Pad Arm Pad M10 Nut 19mm Large Round Cap User's Manual Exercise Guide Hex Key Note: "#" indicates a non-illustrated part. Specifications are subject to change - ProForm Fusion 6.5 Lx | English Manual - Page 21
in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre - ProForm Fusion 6.5 Lx | English Manual - Page 22
EXPLODED DRAWING A-Model No. PFSY6806.0 R0906A 98 46 39 92 25 110 46 54 108 44 71 46 54 46 108 44 71 50 8 98 68 41 40 72 89 18 88 105 42 26 11 116 105 11463 66 109 64 117 65 104 75114 11 108 19 20 91 43 74 44 108 74 90 80 111 49 3 67 60 108 108 113 107 111 49 90 45 90 84 25 - ProForm Fusion 6.5 Lx | English Manual - Page 23
EXPLODED DRAWING B-Model No. PFSY6806.0 R0906A 99 78 24 97 99 77 99 77 78 47 43 47 12 43 57 78 99 97 47 99 77 97 97 43 95 47 99 78 61 81 105 14 77 99 78 15 99 77 105 59 55 108 56 99 99 100 100 99 70 78 99 13 69 82 13 106 101 106 57 77 92 2 96 92 105 43 48 11 - ProForm Fusion 6.5 Lx | English Manual - Page 24
the NAME of the product (PROFORM FUSION 6.5 LX weight system) • the SERIAL NUMBER of the product (see the front cover of this manual) • the KEY NUMBER and or abnormal usage or repairs not provided by an ICON authorized service center; products used for commercial or rental purposes; or products
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Model No. PFSY6806.0
Serial No.
Write the serial number in the
space above for future reference.
Serial Number Decal (Under Seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.proformservice.com
USER’S MANUAL