ProForm Performance 400 C Treadmill English Manual - Page 9
Make sure that the Upright Wire 70 is not, pinched., Start both Screws before tightening them.,
View all ProForm Performance 400 C Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4. Identify the Left and Right Base Covers (73, 74). Slide the Left and Right Base Covers onto the 4 Left and Right Uprights (75, 76) as shown. 75 76 74 73 5. Set a Handrail (71) onto the Left Upright (75). Make sure that the Upright Wire (70) is not 5 pinched. Attach the Handrail (71) with two 5/16" x 2 1/4" Screws (7) and two 5/16" Star Washers (8). Start both Screws before tightening them. Attach the other Handrail (not shown) in the same way. Note: There is no wire on the left side. Remove and discard the two indicated screws (A) from both Handrails (71) (only one is shown). 75 7 8 A 71 70 9
9
4.
Identify the Left and Right Base Covers (73, 74).
Slide the Left and Right Base Covers onto the
Left and Right Uprights (75, 76) as shown.
74
76
75
73
4
5.
Set a Handrail (71) onto the Left Upright (75).
Make sure that the Upright Wire (70) is not
pinched.
Attach the Handrail (71) with two 5/16" x 2 1/4"
Screws (7) and two 5/16" Star Washers (8).
Start both Screws before tightening them.
Attach the other Handrail (not shown) in the
same way.
Note: There is no wire on the left
side.
Remove and discard the two indicated screws
(A) from both Handrails (71) (only one is shown).
71
8
A
75
7
70
5